Automobile spray booth

Model:

700IIA

700IIB

700IA

700IB

Inside Dimensions:

7000(L)X4000(W)X2650(H) mm

Outside Dimensions:

7120(L)X5420(W)X3350(H) mm

7120(L)X5670(W)X3350(H) mm

Wall Panels:

prepainted steel sheet,double skined with insulations(EPS or Glass-wool),tongue and groove interlock construction,thickness:60mm

Doors:

2-fold main entrance door,2800(W)x2800(H) mm;One personnel door,800(W)x2000(H) mm

Basement and Floor:

Pit base(type 4) or raised metal-base(300mm high);Floor:2 rows of gratings and 3 rows of indented plates

Intake:

One backward inclined turbo fan,

Two double-intake centrifugal fans,

capacity:20000cmh,motor:5.5kW,direct drive

capacity:20000cmh,motor:4kWx2,belt drive

Extract:

One backward inclined turbo fan,

One double-intake centrifugal fan,

capacity:20000cmh,motor:5.5kW,direct drive

capacity:20000cmh,motor:5.5kW,belt drive

By-Pass:

Pneumatic damper from spraying to baking cycle

Heating System:

Stainless heating exchanger,60-80 working temperature.RG5S oil burner from Riello,Italy.(gas burner optional)

Filter System:

4 sorts of filters:Prefilter,ceiling filter,floor paint-stop filter,extract paint-stop filter

Ceiling Filtration Area:

22m²

28m²

22m²

28m²

lighting:

Upper inclined lights

Side wall panel lights

Upper inclined lights

Side wall panel lights

10 units,4x36W each

10 units,4x36W each

10 units,4x36W each

10 units,4x36W each

Control System:

Reliable components,digital temperature readout,spray and bake temperature settings,bake timer,hour meter,

over temperature alarm,indicator lights,emergency stop,"Dwyer"mark II pressure gauge with manual damper control

Note:

        1.Type 1:300mm high raised metal-base with 2 ramps outside.

           Type 2:300mm high raised metal-base with ramps inside.(Standard)

           Type 3:300mm high raised metal-base, base-down installation,no ramps needed.

            Type 4:pit style installation,no raise metal-base needed

        2.Additional side lights optional(Vertical or horizontal installed)